Latest
- Rugged Feeders For Outdoor Animals
RUGGED FEEDERS FOR OUTDOOR ANIMALS FULLY ASSEMBLED * ATTRACTIVE POINT OF SALES PACKAGING.
Model 1CF small hound feeder Ideal for small hounds, cats and other small mammals. Made of rugged galvanized steel. Use outdoors or indoors. No sharp edges to injure animals. Feed bowl designed to prevent waste. Notched back for optional mounting on fence or wall. Ready to use. Two pack.
Model DF25 indoor/outdoor pet feeder Great for medium and small dogs and cats, too. Made of rugged 28 gauge galvanized steel. Feeder holds approximately 25 lbs. of food. No sharp edges to injure animals. Feed bowl designed to prevent waste. Notched back for optional mounting on fence or wall. Assembled and ready to use. Single pack.
Model DF50 big dog feeder The largest dog can easily eat from this king sized unit. Made of rugged 28 gauge galvanized steel. Feeder holds a full 50-lb. bag of dog food. No sharp edges to injure your pet. "No-waste" feed bowl. Designed for years of service. Assembled and ready to use. Single pack.
PET EQUIPMENT SPECIFICATIONS
Model No. Description Approx. Capacity Overall Size (Inches) Shipping Weight Width Length Height DF25 Pet Feeder 25 lbs. 12 1/2 11 25 11 lbs. DF50 Big Dog Feeder 50 lbs. 16 1/2 11 1/2 28 17 lbs. 1CF Small Hound Feeder 8 lbs. 12 6 14 8 lbs./2 pack - Top Hatch Incubator
Affordable Technology - Multiple Applications. ONE UNIT DOES IT ALL. Clear top is standard, Phenolic tower protects eggs from uneven heat; protects newly hatched chicks from heat source. Automatic electric turning is standard. Tech Temp Control gives non-fluctuating heat.
14 Reasons why you'll never buy another Styrofoam incubator.
-Hygiene: Our tray is removable and dishwasher safe. Styrofoam pores hide pathogens and the surface cannot be scrubbed.
-More even heat: Our Tech Temp Control adjusts for temperature fluctuations caused by any changes in the environment. Tech Temp Control adjust to temperature changes more quickly than a wafer / snap action switch. Fewer hot spots and no forced blasts of air.
- Continual Air Exchange: Standard equipment fan gently mixes heated air which billows throughout tray.
- Protected rolling of the eggs: Accomplished with our STANDARD AUTOMATIC TURNER.
- Turning Rack: Does not need to be removed for hatching.
- Universal egg rack: No need to buy separate cups for different species.
- Built-in candling inspection system: No need to incur extra expense to candle for fertility and humidity.
- Total visibility to eggs: No more small windows covered with condensation. No extra investment for a clear top.
- Self-diagnostic heat source: You always know you've got heat - just look at the light.
- Readily available heat source: Replacement heat is far away as your nearest bulb retailer (60 watts, Candelabra Base)
- Newly hatched chicks safe from heat: The heating elements found in Styrofoam can burn the beaks of curious chicks.
- A complete design: No after-thought add-ons. You don't need to cut holes in Styrofoam to add our automatic turner cord set.
-No extension ring: Not needed for larger eggs such as goose and turkey because 7" (17.8 cm) of clearance is standard.
- Durability and value: You don't get a 1-year warranty on Styrofoam. Our incubator is designed for years of service yet our unit is comparably.Incubator Specifications Model No. Description Egg Capacity (approximate) Overall Diameter Inches (cm) Shipping Weight Lbs. (kg) Chicken Quail Pheasant Turkey Goose THI20 Top Hatch Incubator, 110v 48 120 48 24 16 18 (45.7) 11.0 (5.0) THI20220 Top Hatch Incubator, 220v, 50 Hz 48 120 48 24 16 18 (45.7) 11.0 (5.0)
Select a Language
Contact Us
Fill out a request form to receive pricing and purchasing information. click here
What's New
NEW!!!
Brower Economy Incubator and Turner
click for more information
Creep Feeder
Compare our Feeder Side by Side
PIG CREEP FEEDER Come Out Of The Corner And Save Pigs, Save Time, Save Feed. Our design allows our creep feeder to be placed in the center or your creep area. The feeder is more noticeable than those mounted in a corner giving all piglets a faster start. Because our creep feeder allows all pigs to eat. Feeders mounted along a partition or in the corner discourage poor doers from fighting for their place at the trough. Our feeder has up to 3 times the linear trough space compared with rectangular, hide in the corner feeders. Our creep feeder is readily cleaned with no feed slides or crevices to hide pathogens. Polypropylene body, stainless steel pegs - no corrosion. Our feeder is easy to fill with up to twice the square inches of fill openings of competing units. No springs, wing nuts, or moving parts. Nothing to maintain. Hit with a high pressure washer and invert. There's no contending with mounting brackets. Move feeder from creep area to your pre-nursery on use in a comfort stall setup. The combination of the 2.5 inch (6.4 cm) lip and 2 stainless steel pegs practically eliminates our feeder being tipped over by piglets. Our 3 inch (7.6 cm) high wall feed in the bowl and inhibits rooting activity.
TIPS ON BROWER CREEP FEEDER USE
Keep feed fresh. Stale feed will not be consumed. Feed wastage will be kept to a minimum by initially filling our feeder with as little as 1/4 cup per feeding. Gradually increase the amount fed as required. This feeder can also be used to reduce stress during the transition from farrowing to nursery. A smooth transition is aided by moving our feeder along with the pigs from the farrowing facility to the nursery and placing our feeder next to your nursery feeder. Our feeder should be removed from the nursery pen 3 to 5 days after weaning.
Selected number one among 14 competitive creep feeders in on-farm trial, as reported in Successful Farming Magazine. Article had the following to say:
Ratings (5 being the best)
FEEDER INSTALLATION 5
ACCESSIBILITY OF FEED TO PIGS 5
FEED WASTE 4
DURABILITY OF FEEDER 5
CLEANUP 5
Discussion: "Feeder easy to place in crate. Pigs went right to this feeder. Two steel pins screw into the bottom to keep the feeder where you put it. Very little feed waste. High sides let pigs in, but feed can't be rooted out. Pigs need to root around in the feed before they learn they can eat it. My favorite feeder and I would purchase more of these."
|
CREEP FEEDER SPECIFICATIONS |
||||||
| Model No. | Capacity | Overall Diameter | Bowl Diameter | Eating Height | Overall Height | Shipping Weight |
| FPCR1 | 2.2 lbs. (1 kg) | 14" (35.6 cm) | 8" (20.3 cm) | 3" (7.6 cm) | 3.5" (8.9 cm) | 33 lbs. (15 kg) per 8 pack |
-
Click to enlarge
Click to enlarge
-
Click to enlarge
Click to enlarge
-
Click to enlarge
Click to enlarge
Navigation Menu
U.S. Poultry
he U.S. Poultry & Egg Association is the world's largest and most active poultry organization. We represent the entire industry as an "All Feather" association. Membership includes producers and processors of broilers, turkeys, ducks, eggs, and breeding stock, as well as allied companies. Read More
National Cattlemen's
NCBA is a consumer-focused, producer-directed organization representing the largest segment of the nation's food and fiber industry. NCBA works to achieve the vision: "A dynamic and profitable beef industry, which concentrates Read More
NAGA
The North American Gamebird Association (NAGA) is a non-profit professional organization established in 1931. For more than 79 years, NAGA members have led the way in improving methods of gamebird production and hunting preserve management. Read More
National Pork Producers
The National Pork Producers Council conducts public-policy outreach on behalf of its 43 affiliated state associations, enhancing opportunities for the success of U.S. pork producers and other industry stakeholders by establishing the U.S. pork industry as a consistent Read More
