1. Skip to Menu
  2. Skip to Content
  3. Skip to Footer>


  • Heated Waterers

    Performance One Box Stall Drinker
    Performance One Model MP06 (For Very Small Requirements)
    Performance One Model MP017 (For New Installations)
    Performance One Model MP012 (For New Installations or For Replacement of Existing Drinkers) - The Knight
    Performance One Model MP025 (For larger operations) - The King

  • Rugged Feeders For Outdoor Animals


    Model 1CF small hound feederModel 1CF small hound feeder Ideal for small hounds, cats and other small mammals. Made of rugged galvanized steel. Use outdoors or indoors. No sharp edges to injure animals. Feed bowl designed to prevent waste. Notched back for optional mounting on fence or wall. Ready to use. Two pack.




    Model DF25 indoor/outdoor pet feederModel DF25 indoor/outdoor pet feeder Great for medium and small dogs and cats, too. Made of rugged 28 gauge galvanized steel. Feeder holds approximately 25 lbs. of food. No sharp edges to injure animals. Feed bowl designed to prevent waste. Notched back for optional mounting on fence or wall. Assembled and ready to use. Single pack.






    Model DF50 big dog feederModel DF50 big dog feeder The largest dog can easily eat from this king sized unit. Made of rugged 28 gauge galvanized steel. Feeder holds a full 50-lb. bag of dog food. No sharp edges to injure your pet. "No-waste" feed bowl. Designed for years of service. Assembled and ready to use. Single pack.











    Model No. Description Approx. Capacity Overall Size (Inches) Shipping Weight
    Width Length Height
    DF25 Pet Feeder 25 lbs. 12 1/2 11 25 11 lbs.
    DF50 Big Dog Feeder 50 lbs. 16 1/2 11 1/2 28 17 lbs.
    1CF Small Hound Feeder 8 lbs. 12 6 14 8 lbs./2 pack
  • Livestock Equipment

    Livestock Equipment Home Page

  • Processing

    Processing Home Page

    Turnkey Equipment and Supplies for Processing Poultry in Small and Medium Sized Plants

    Check out Brower's complete line of poultry processing.
    Equipment     Processing Plans

    Killing Equipment
    Scalding Equipment
    Picking Equipment
    Eviscerating Equipment
    Chilling Equipment
    Bagging Equipment
    Home Picking Options

    Processing Plans for 400 Birds/Hour
    Processing Plans for 600 Birds/Hour
    Processing Plans for 1000-1200 Birds/Hour

    Case Histories

    Case Histories for 600 Birds/Hour 1 2
    Case Histories for 1000-1200 Birds/Hour 1 2 3 4 5

  • Production


    Equipment for Poultry, Livestock, and Pets

    Brower Production Equipment

    Brower's Top-Hatch Incubator
    Chick and Quail Brooder
    Cage Drinker
    Round Feeders & Feed Cups
    Reel, Flip Top & Slide Top Feeders
    Small Founts & Water Cups
    Brower One & Two Gallon Founts
    Heater Base for Poultry Founts
    Brower All-Poly Tip-Over Founts
    Brower All-Poly Top-Fill Founts
    Brower All-Poly Capacity Drinkers
    Game Bird Feeder
    Hanging Feeders
    Laying Nest & Accessories
    General Accessories
    Thermometers & Hygrometers
    General Heating Equipment
    Feeders for Outdoor Pets
    100% Energy Free Livestock Waterers
    SOK10/SOK17 Shut-off Kits

    Brower Tuff Tanks
    Brower Mineral Feeders
    Pig Creep Feeder
    Creep Feeders and Waterers
    Rotary Hog Feeders
    Supplement Feeders
    Brower Hog Feeders
    Utility Drinker
    Field Drinker
    Sorting Panels
    KRIT-R KOO-Z Insulated Bucket Holder
    Performance One Box Stall Drinker
    Performance One Model MP06 (For Very Small Requirements)
    Performance One Model MP017 (For New Installations)
    Performance One Model MP012 (For New Installations or For Replacement of Existing Drinkers) - The Knight
    Performance One Model MP025 (For larger operations) - The King
    KRIT-R Kanteen-30 Gallon Canteen and Base
    SUPER INSULATED Steel Livestock Waterers

    * HE10 Series Electric Heating Units
    * Quick Reference for Water Valves
    * Repair Part Lists for Super Insulated Steel Waterers

  • Top Hatch Incubator

    Top Hatch IncubatorAffordable Technology - Multiple Applications. ONE UNIT DOES IT ALL. Clear top is standard, Phenolic tower protects eggs from uneven heat; protects newly hatched chicks from heat source. Automatic electric turning is standard. Tech Temp Control gives non-fluctuating heat.

    14 Reasons why you'll never buy another Styrofoam incubator.

    -Hygiene: Our tray is removable and dishwasher safe. Styrofoam pores hide pathogens and the surface cannot be scrubbed.
    -More even heat: Our Tech Temp Control adjusts for temperature fluctuations caused by any changes in the environment. Tech Temp Control adjust to temperature changes more quickly than a wafer / snap action switch. Fewer hot spots and no forced blasts of air.
    - Continual Air Exchange: Standard equipment fan gently mixes heated air which billows throughout tray.
    - Protected rolling of the eggs: Accomplished with our STANDARD AUTOMATIC TURNER.
    - Turning Rack: Does not need to be removed for hatching.
    - Universal egg rack: No need to buy separate cups for different species.
    - Built-in candling inspection system: No need to incur extra expense to candle for fertility and humidity.
    - Total visibility to eggs: No more small windows covered with condensation. No extra investment for a clear top.
    - Self-diagnostic heat source: You always know you've got heat - just look at the light.
    - Readily available heat source: Replacement heat is far away as your nearest bulb retailer (60 watts, Candelabra Base)
    - Newly hatched chicks safe from heat: The heating elements found in Styrofoam can burn the beaks of curious chicks.
    - A complete design: No after-thought add-ons. You don't need to cut holes in Styrofoam to add our automatic turner cord set.
    -No extension ring: Not needed for larger eggs such as goose and turkey because 7" (17.8 cm) of clearance is standard.
    - Durability and value: You don't get a 1-year warranty on Styrofoam. Our incubator is designed for years of service yet our unit is comparably.

    Incubator Specifications
    Model No. Description Egg Capacity (approximate) Overall Diameter Inches (cm) Shipping Weight Lbs. (kg)
    Chicken Quail Pheasant Turkey Goose
    THI20 Top Hatch Incubator, 110v 48 120 48 24 16 18 (45.7) 11.0 (5.0)
    THI20220 Top Hatch Incubator, 220v, 50 Hz 48 120 48 24 16 18 (45.7) 11.0 (5.0)

Select a Language

English French German Italian Portuguese Russian Spanish

Contact Us

Call us at 1-800-553-1791 or you may fill out a request form to receive pricing and purchasing information. click here

What's New

Brower Economy Incubator and Turner

click for more information

Processing Plans 1000-1200 Birds/Hour

PDF Print E-mail

Dim lights Embed Embed this video on your site

As you begin planning your processing operation, obtain the advice of your local inspector.  Requirements vary from one geographic area to another.  By obtaining the blessing of your local inspector, you can often save time and expense.  Local extension personnel can also be a good source of knowledge.

A summary of personnel required is shown in Exhibit 1.  You will need about 6 people to kill, scald, and pick. You will need about 16 people to eviscerate and pack. Exhibit 2 shows the approximate location of these 22 people.


When killing the bird, it is best to cut the carotid artery, not the windpipe.  This allows the bird to more easily bleed and minimizes shock.  A properly bled bird will have little or no blood around the bone or joint.  If you use an electric stunner and blood appears in the joints, the bird has been stunned too hard.  Turn the setting lower.  Do not cut the head off as the bird is bled.  This will result in an undesirable appearance.  The head should be removed during the evisceration process.  Estimate bleeding time at about 1 minute and 15 seconds.

Recommended Scald Capacities are:

Model No. Length of Scald Birds Scalded At One Time
SS48SS Broilers 1 minute 24
Pheasants 1 minute 24
Turkey Hens 1 minute 8-10
Turkey Toms 1 minute 5
Quail 30 seconds 50-60
Duck 1 minute 30
Scald Temperatures: Broilers 145° F ( 63° C )
Quail 127° F ( 53° C )
Duck 150° F ( 66° C )

Recommended Pick Capacities are:

Model No. Length of Pick Birds Picked At One Time
SP38SS Broilers 30 seconds 12
Pheasants 30 seconds 12
Turkey Hens 30 seconds 5-7
Turkey Toms 30 seconds 3
Quail 15 seconds 35-40
Duck 30 seconds 15


All capacities indicated for individual machines or for complete systems are approximate.  The ability to achieve the capacities indicated depends on many factors including but not limited to labor force experience, plant layout, whether or not equipment is operated under continuous production and size of the birds.  Capacities indicated generally assume a 2.5 pound (1.1 kilogram) broiler.  Birds larger than that will reduce capacity.

When processing pheasant and turkeys, hand strip heavy wing and tail feathers ("flight feathers") before picking.  Water fowl are a difficult species to pick--whether they are dry picked (no scald) or if they are scalded and picked.

Use only Model SS48SS Scalder and Model SP38SS Picker for larger turkey operations. Our smaller picker and scalder can be used if you are processing a few turkeys.  If when picking, it apparent that the birds are not sufficiently scalded, we recommend a longer scald, not a higher temperature.

Consider placing a sturdy step or platform between your scalder and picker.  This can improve productivity by making it easier to move birds between the two machines.

Make sure your Model SS48SS Scalder is properly vented and that the vent is open.  Without venting, heat builds up under the scalder and can cause equipment damage. Also, efficiency will be reduced resulting in higher gas consumption.

With practice, you can achieve a yellow skin if desired.  A bird has two skins.  The outer yellow skin is usually loosened in the scald.  However, if you drop the scald temperature to 127° F (53° C), the outer yellow skin will remain in place.  Scald for the same length of time, just drop the temperature.

There are market for feet.  Should you elect to market them, you can get them in presentable condition.  Scald the feet twice (1 minute each time) and pick once for 30 seconds.  The skin should be removed and you should have a marketable item.


Do not run the eviscerating line conveyor any faster than necessary to get the production you need.  Usually 1000 birds per hour requires 20-22 feet per minute line speed.

Two workers can remove feet (at hocks) and cut oil glands (at the base of tail).  This is normally done before birds are hung on the shackle (feet may need to be left on small birds to hang in shackles).  Position a barrel or cart near this area to catch feet.

The fourth and fifth workers can hang the bird on the shackle, hook the head (3 point suspension), cut skin up the back of the neck and pull crop.

Sixth and seventh workers open the tail, cut and pull vent.

Eighth and ninth workers draw entrails, separating heart, liver, and gizzard (giblet mass), discarding offal.  Care must be taken to pull the intestines without tearage or rupture.  Contamination can result if the operation is improperly performed.

A tenth worker can separate giblets, carefully pinch gall from liver or cut it with heart liver shears.  The gall may cause contamination and discoloration if broken.  The sack can be removed from around the heart with your fingers.  Trim tubes with shears.

The eleventh worker can split, wash and trim gizzards (a hack saw blade works well for splitting open the gizzard).  Trim gizzard with shears.  Fat and lining will be removed by peeler.

The twelfth worker can mechanically peel gizzards, move giblets to chill area, refill and ice giblet pans.  This worker will not be busy all the time, but this procedure is hard to combine with another.

The thirteenth worker will remove the lungs and wash the cavity.

The fourteenth worker will remove the head, cut the neck at the base, perform a carcass wash and inspection, then drop into chill tank.

A supervisor can stock, rinse and move chill tanks, as well as perform spot inspections.

After carcasses and giblets are chilled, 2 workers can drain and wrap giblets, drain carcasses, pack giblets in carcass and bag carcasses to prepare for freezing, etc.

Per Minute Per Minute
Cut Feet 26.9 Trim Heart 25.6
Cut oil sack 36.8 Trim Liver 22.7
Hang on 3 point 36.2 Trim, Open and Wash gizzard 11.7
Pull Crop 14.4 Peel Gizzard 38.2 by machine
Remove Vent 21.6 17.8 by hand
Draw Entrails 13.7 Remove Lung 21.5 by vacuum
14.5 by hand


Consult a refrigeration or ice machine manufacturer or other expert about chilling your birds.  This can be a capital intensive part of your operation.  Purchase equipment that can be serviced in your locale.  Purchasing an ice bin allows you to run your ice machine 24 hours a day.  Other options for consideration include placing ice storage inside of a cooler or placing an ice machine on top of a small cooler.  In other words, there are several creative possibilities for adding cooling capability you need.

Chilling is necessary to reduce pathogen development.  Chilling by itself will reduce pathogens.  Birds need to be thoroughly washed as well.  Birds need to be chilled to below 40°F (4°C), i.e. 35 - 37°F (2-3°C) within 4 hours of death.  Maintenance of the bird at this temperature can give shelf life of 7-10 days.  The inside of the carcass should be chilled to this temperature.  In operations of the size and type we sell, some variation of ice is usually used.  Cubed, diced, flaked or crushed ice works better than large ice chunks.  The amount of ice depends on the ratio of ice to water and also depends on the temperature of the room where chilling is performed.  For chilling, use about 1.5 pound to 1.75 pounds (.7-.8kg) of ice per bird.  This is where the water in your chill tank is about 35°F (2°C) and where room temperature is 68-77°F (20-25°C).  To maintain birds in a cooler, use 10-15 pounds of ice (4.5-6.8kg) in a tray of say 20 birds.

Using Brower's chill pump Model No. CTAP60 (or CTAP50) will help your ice go further.  Don't overload your chill tanks.  Capacities are approximately:

Model No.
PP430 75-100 Chickens
PP412 50-75 Chickens
PP433 20-30 Chickens

You will probably need two workers to ice, make boxes, pack boxes, weigh and stack or load.  A foreman should handle one of these positions as packing twenty boxes of birds per hour is not a full-time job for one person.  Be sure to train one of these people and make them responsible for assuring birds are properly chilled.

You will need two wheel trucks for moving coops and ice boxes.  You may want to purchase small tables to facilitate your operation after you have had some experience.  You may want to leave more space than is shown shown Exhibit 2 between the killing line and the door.  You may need more space to weigh live coops, hang and kill depending on your operation.  We also recommend our electric stunner to reduce death shudder and carcass damage.  To keep your stainless looking bright, mineral oil is excellent for cleanup.

1. Unload coops -- hang on killing line/stun-bleed birds 2 - people
2. Scalder 1 - person
3. Picker 1 - person
4. Cut hocks/oil gland 1 - person
5. Hang on eviscerationconveyor/pull crop 1 - person
6. Open tail/pull vent (J cut) 1 - person
7. Pull entrails seperating giblet mass 1 - person
8. Separate giblet mass/pinch gall/trim heart 1 - person
9. Split/wash/trim gizzard 1 - person
10. Peel gizzards/tend to giblets 1 - person
11. Remove lungs/wash cavity 1 - person
12. Remove head/remove neck/carcass wash 1 - person
13. Supervisor/work chill tanks/inspection 1 - person
14. Packaging/general help 2 - people

TOTAL 22 - people

U.S. Poultry

he U.S. Poultry & Egg Association is the world's largest and most active poultry organization. We represent the entire industry as an "All Feather" association. Membership includes producers and processors of broilers, turkeys, ducks, eggs, and breeding stock, as well as allied companies. Read More

National Cattlemen's

NCBA is a consumer-focused, producer-directed organization representing the largest segment of the nation's food and fiber industry. NCBA works to achieve the vision: "A dynamic and profitable beef industry, which concentrates Read More


The North American Gamebird Association (NAGA) is a non-profit professional organization established in 1931. For more than 79 years, NAGA members have led the way in improving methods of gamebird production and hunting preserve management. Read More

National Pork Producers

The National Pork Producers Council conducts public-policy outreach on behalf of its 43 affiliated state associations, enhancing opportunities for the success of U.S. pork producers and other industry stakeholders by establishing the U.S. pork industry as a consistent Read More